Dental Fast Zirconia Sintering Furnace ,Dental Lab Dental Equipment,High Purity Elema Technology,CE Approved
●High Purity Elema Technology
●Voltage controller. The service life of the silicon elemais effectively prolonged. ●The velocity of temperature increasing: 200℃/min Max.
●Fast temperature rise to 1530°C in 20 minutes，the whole crystallization process takes 40 minutes to 1 hour.
●Each stage has voice prompt. Program selection prompt to prevent using wrong program.
Tips: If the payment amount is more than $5000, you are advised to choose the bank for payment.
Very fast zirconia sintering furnace，the TR-DLC01 is specially designed for sintering dental ceramic materials.
High purity elema technology,fast temperature rise to 1530℃ in 20 minutes!
1. Fast crystallization of full anatomical formzirconia.
2.90mm super-diameter tray, full mouth cavity tooth sintering without pressure.
3. Pre-drying time can be set to completely dry the denture.
4. The maximum temperature can be set to 1550 C, suitable for all zirconia.
5. Maximum heating rate 200 degrees per minute.
6. It is ready to use without preheating in advance.
7. Automatic fast cooling technology.
8. Closed silo design, with maximum safety (chair side).
9. Up to 80 teeth can be sintered (90mm tray * 2).
10. Variable load design, automatic power regulation of sintering furnace (energy saving).
True color touch screen, easy to operate.
Each stage has voice prompt. Program selection prompt to prevent using wrong program.
1.[SPEED/GLAZE] :Sintering interface.
2.[STANDARD]:Standard procedure selection.
3.[CUSTOM]:Custom program selection.
4.[PROGRAM]:Program parameter setting interface.（50 custom programs and built-in programs）
6.[UP]:The tray rises.
90mm Sinter Tray
Up to 80 teeth can be sintered.
1.The velocity of temperature increasing: 200℃/min Max.
2.The max temperature:1550℃max
3.The time which can be kept at the max temperature: 2 H
4.Operation range：100-120V 50/60HZ 230V 50/60HZ
5.Electric current：30Ampere@110V 20Ampere@230V
7.Volume:width 36cm,Depth 46cm,Height 59cm
8.Usable measure (firing chamber):9cm
10.Weight include the package:45Kg
12.Ambient temperature: 2°C to 40°C
13.Relative humidity 80% at 31°C
14.Maximum altitude: 1500 m (Special Model:3500m)
15.Rated voltage fluctuations must not exceed plus/minus 10% of the rated voltage
Installation and Use Instruction
1.The sintering furnace must be installed in the dry room,and it must be put at least 25cm away from the wall.
2.If the temperature is below 15 °C (59 ºF) (e.g. after transport), leave the device to stand for approx. 30 minutes before using it for the first time at room temperature.
3.Ensure that the device is on a heat-resistant surface. The radiation and heating of the device is in the non-hazardous range. However, heat-sensitive surfaces of furniture and veneers could become somewhat discolored over time due to the constant influence of heat.
4.Please avoid direct sunlight.
5.MUST NOT put flammable around the sintering furnace.
Powerful power is the guarantee for rapid temperature rise of sintering furnace. The limit power of 3000W instantly releases a large amount of heat energy. Make the furnace temperature rise rapidly, and the high-purity silicon carbon rod has strong heat-resistant load capacity. However, it is necessary to provide 2.5mm (220V) or 6mm (110V) cable for power supply, and only one sintering furnace can be used on this wire.
Attention：Never start up the device without baking core!
|Power Input||220V,50Hz / 110V,60Hz (Option)|
|Package Gross Weight||100kg|
1. All the items at TREEDENTAL store are covered with a warranty. The warranty period is indicated in each item's description.
2. Warranty covers a replacement or repair of the faulty item. Contact us immediately for any issue that might happen to our product within the warranty period which is not man-made. You simply need to fill in the TREEDENTAL International Warranty Form here.
3. Within the warranty period, TREEDENTAL store will be responsible for covering the fee of the new spare parts and their shipping cost into your destination. If the faulty item needs to be sent back to our store for checking and repair, then we will cover the fee of shipping it back to our store. Upon its arrival to our store, we will cover the fee of the repair and ship it back to your doorstep for free also.
4. If your purchased item is out of the warranty period, then you can report the issue to us into [email protected] and our technical support team will issue you a report for the repair fee based on the kind of the fault.
5. Replacement: In case the product received comes with manufacturing defects, the buyers are entitled to request a product replacement within 7 days of receiving the item. To request a replacement, the buyers are required to provide photographic as well as video evidence of the product’s manufacturing defects which can be sent to our email: [email protected]. If the case is deemed valid, then we will cover the related cost to deliver a replacement.
The price displaying on website is factory price only, not including any shipping cost, your country’s import tax, customs clearance fee and insurance.
We can ship out the goods to you by three ways: Express ( DHL/UPS/FeDex/EMS), Air Shipping or Sea Shipping.
Express is the better way for order which the weight is under 10KG, it normally takes 4-7 days for delivery and delivery to your door directly.
Air Shipping is a good way for heavy order more than 100kg if you need the order urgently. It normally takes 7-10 days for delivery. But you need to do the customs clearance at your airport and pick the goods up there.
Sea Shipping is the lowest-cost way for big order, such as dental chair/dental unit order. It normally takes 30-60 days for delivery. But you need to do the customs clearance at your seaport and pick the goods up there.
The shipping cost which we charge you when you do the Checkout on our website is just for the Express shipping cost, if you want to use a cheaper shipping way, such as Sea Shipping, you need to contact us for the quote.
For the Air Shipping and Sea Shipping, if you don’t want to take the trouble to do the customs clearance and just want goods delivery to your door, we also can do that for you in additional charge.
Different country will have different import tax rate for different items, some country even 0 import tax for dental equipment. So if you want to know the exact import tax rate of the products, you need to inquire your customs department. Our price is not including any import tax, you need to pay it to your customs when the package arrive your country. But you can inform us to make a low value shipping invoice for you to avoid high import tax.
Shipping insurance covers any damage or missing for your order during the transportation, so we highly recommend you to buy it for your large amount order. The insurance premium are as follows:
a.For Express/Air Shipping/Sea Shipping, the insurance premium= the sum insured*1.1*0.0008, minimum insurance premium for each bill is USD 30.
b.For Air Shipping or Sea Shipping with door to door delivery service, the insurance premium= the sum insured*1.1*0.0013, minimum insurance premium for each bill is USD 30.
c.Deductible: USD300 or 0.5% of the sum insured of the whole consignment, whichever is higher.
If you want to buy the shipping insurance for your order, you can buy it together with your order here: Cargo Transportation Insurance,PICC
Let’s take an example for these three different shipping ways (Just for reference):
One set of R7 dental chair shipped to Toronto, Canada.
Package Size： 147*110*153CM
Package Gross Weight：285KG
The value on shipping invoice: USD$4980
Shipping Cost You Paid to Treedental (USD$)
import tax (USD$)(For Canada, no duty but 5% GST)
customs clearance fee(USD$)
Delivery charge from airport/seaport to your door(USD$)
1 set and 5 stes of R7 dental chair shipped to New York, United States.
Package Size： 147*110*153CM/SET
Package Gross Weight：285KG/SET
The value on shipping invoice: USD$4980/SET
Shipping Cost You Paid to Treedental (USD$)
import tax (USD$)
Custom Duty(includ ISF)(USD$)
Seaport Local Charge (USD$)
Warehouse fee (USD$)
Delivery charge from airport/ seaport to your door (USD$)
Customs Clearance Fee (USD$)
(DHL/UPS/FeDex/EMS) 1 set
|3180 (From factory to your door)||50||0||0||0||0||0||3230|
(DHL/UPS/FeDex/EMS) 5 sets
|15900 (From factory to your door)||250||0||0||0||0||0||16150|
|Air Shipping 1 set||2310 (From factory to your airport)||50||0||0||0||0||0||2360|
|Air Shipping 5 sets||11550 (From factory to your airport)||250||0||0||0||0||0||11800|
|Sea Shipping 1 set||450 (From factory to your seaport)||50||185||300||415||450||125||1925|
|Sea Shipping 5 sets||545 (From factory to your seaport)||250||260||715||535||900||125||3330|